Keep hair healthy, strong and promote shine. Eliminate build up and stimulate blood flow to the scalp. This shampoo has a 100% natural base and is scented with our Breeze Aroma Blend with pure Bergamot and Oakmoss essential oils. Benefits: • 100% naturally derived ingredients • Coconut Oil - helps prevent breakage • Panthenol - gives hair body and bounce • Chamomile Extract - hydrates hair and scalp Ingredients: aqua, decyl glucoside, Cocamidopropyl Betaine (Coconut)*, lactobacillus ferment, disodium cocoamphodiacetate, glycerin, panthenol, salix alba extract, sodium chloride, chamomilla recutita (matricaria) flower extract (chamomile)* *plant derived/dérivés des plantes. Source: https://escentsaromatherapy.com/collections/hair-care-1/products/shampoo-breeze-500ml?variant=40182315385017

Keep hair healthy, strong and promote shine. Eliminate build up and stimulate blood flow to the scalp. This shampoo has a 100% natural base and is scented with our Breeze Aroma Blend with pure Bergamot and Oakmoss essential oils. Benefits: • 100% naturally derived ingredients • Coconut Oil - helps prevent breakage • Panthenol - gives hair body and bounce • Chamomile Extract - hydrates hair and scalp Ingredients: aqua, decyl glucoside, Cocamidopropyl Betaine (Coconut)*, lactobacillus ferment, disodium cocoamphodiacetate, glycerin, panthenol, salix alba extract, sodium chloride, chamomilla recutita (matricaria) flower extract (chamomile)* *plant derived/dérivés des plantes. Source: https://escentsaromatherapy.com/products/shampoo-breeze-500ml?variant=40182315385017

CAS: 90-72-2 2,4,6-Tris(dimethylaminomethyl)phenol Production Process and Method Brief introduction. 2,4,6-tris(dimethylaminomethyl)phenol, an organic chemical substance, molecular formula: C15H27N3O. Chinese name: 2,4,6-tris(dimethylaminomethyl)phenol Foreign name: 2,4,6-Tris(dimethylaminomethyl)phenol English alias: 2,4,6-tris[(dimethylamino)methyl]phenol Alias: Epoxy accelerator DMP-30; Tris(dimethylaminomethyl)phenol Appearance: transparent liquid Chemical formula: C15H27N3O Molecular weight: 271.4314 CAS No.: 90-72-2 EINECS number: 202-013-9 Boiling point: 320.50 ℃ Density: 1.054 g/cm³ Flash point: 116.63 ℃ Refractive index: 1.517 Epoxy resin curing accelerator DMP-30 is 2,4,6 tris(dimethylaminomethyl)phenol, which is a tertiary amine curing agent. It can be used as an epoxy resin curing agent at room temperature, and also as an efficient accelerator for acid anhydride, polyvinylamine and aliphatic polyamine curing agents. This product contains phenolic hydroxyl group in its molecular structure, so the activity is increased and it can be used for fast curing, mainly for thermosetting epoxy resin curing agent and adhesive, and it can be used as accelerator of acid anhydride curing agent and amide curing agent for casting and pressure layer products, the amount of this product as curing agent is generally about 3-13%, and the amount as accelerator is generally 0.1-3%. This product can be used as a catalyst in rubber anti-ozone agent and rigid polyurethane foam raw material combination polyether. Production process. 2000L reaction kettle, 200kg of phenol, 720kg of dimethylamine, 520kg of formaldehyde added dropwise below 50 degrees. kg, after drop addition, raise the temperature to 70 degrees, keep warm for 2 hours, lower the temperature to 50 degrees, add 100 kg of sodium chloride Sodium chloride, stir, let stand, stratify, and dehydrate the crude product under pressure. Method of preparation. After the reaction of phenol with dimethylamine and formaldehyde, the reaction products are stratified, dehydrated under vacuum and filtered to obtain the finished product. Theoretical unit consumption: (one ton of product) Phenol: 400 kg Dimethylamine (40% aqueous solution) 1440kg Formaldehyde (37% aqueous solution) 1040kg Produce waste water about 1.8 tons, mainly containing a small amount of formaldehyde Dosage: As accelerator dosage is about 1~5% As a curing agent dosage of about 10% Application areas. Use one Used as curing agent for thermosetting epoxy resin, adhesive, binder for laminate material and flooring, acid neutralizer and catalyst in polyurethane production Application 2 Used as antioxidant, also used in dye preparation Application 3 Used as curing agent for thermosetting epoxy resin, adhesive, sealant for laminate materials and flooring, acid neutralizer and catalyst in polyurethane production. Numbering system. CAS No.: 90-72-2 MDL No.: MFCD00008330 EINECS No.: 202-013-9 RTECS No.: SN3500000 BRN No.: 795751 PubChem No.: 24900319 Safety information. Package Class: III Hazard Class: 8 Customs Code: 29222900 Dangerous Goods Transport Code: UN 2735 8/PG 3 WGK Germany: 1 Hazardous category code: R22; R36/38 Safety instructions: S26-S28-S2 RTECS number: SN3500000 Dangerous Goods Marking: Xn Safety terminology. S26 - Immediately after inadvertent contact with eyes, flush with plenty of water and seek medical advice. S28 - Immediately after inadvertent contact with skin, flush with plenty of soapy water. S2 - Avoid contact with children. S61 - Avoid release into the environment. Refer to special instructions/safety data sheet. S45 - In case of accident or discomfort, seek immediate medical attention (if possible, show its label). S36/37/39 - Wear appropriate protective clothing, gloves and goggles or mask. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. After the original packaging, please fasten the lid as soon as possible to prevent the mixing of other substances such as moisture to affect the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/39733

CAS: 90-72-2 2,4,6-Tris(dimethylaminomethyl)phenol Production Process and Method Brief introduction. 2,4,6-tris(dimethylaminomethyl)phenol, an organic chemical substance, molecular formula: C15H27N3O. Chinese name: 2,4,6-tris(dimethylaminomethyl)phenol Foreign name: 2,4,6-Tris(dimethylaminomethyl)phenol English alias: 2,4,6-tris[(dimethylamino)methyl]phenol Alias: Epoxy accelerator DMP-30; Tris(dimethylaminomethyl)phenol Appearance: transparent liquid Chemical formula: C15H27N3O Molecular weight: 271.4314 CAS No.: 90-72-2 EINECS number: 202-013-9 Boiling point: 320.50 ℃ Density: 1.054 g/cm³ Flash point: 116.63 ℃ Refractive index: 1.517 Epoxy resin curing accelerator DMP-30 is 2,4,6 tris(dimethylaminomethyl)phenol, which is a tertiary amine curing agent. It can be used as an epoxy resin curing agent at room temperature, and also as an efficient accelerator for acid anhydride, polyvinylamine and aliphatic polyamine curing agents. This product contains phenolic hydroxyl group in its molecular structure, so the activity is increased and it can be used for fast curing, mainly for thermosetting epoxy resin curing agent and adhesive, and it can be used as accelerator of acid anhydride curing agent and amide curing agent for casting and pressure layer products, the amount of this product as curing agent is generally about 3-13%, and the amount as accelerator is generally 0.1-3%. This product can be used as a catalyst in rubber anti-ozone agent and rigid polyurethane foam raw material combination polyether. Production process. 2000L reaction kettle, 200kg of phenol, 720kg of dimethylamine, 520kg of formaldehyde added dropwise below 50 degrees. kg, after drop addition, raise the temperature to 70 degrees, keep warm for 2 hours, lower the temperature to 50 degrees, add 100 kg of sodium chloride Sodium chloride, stir, let stand, stratify, and dehydrate the crude product under pressure. Method of preparation. After the reaction of phenol with dimethylamine and formaldehyde, the reaction products are stratified, dehydrated under vacuum and filtered to obtain the finished product. Theoretical unit consumption: (one ton of product) Phenol: 400 kg Dimethylamine (40% aqueous solution) 1440kg Formaldehyde (37% aqueous solution) 1040kg Produce waste water about 1.8 tons, mainly containing a small amount of formaldehyde Dosage: As accelerator dosage is about 1~5% As a curing agent dosage of about 10% Application areas. Use one Used as curing agent for thermosetting epoxy resin, adhesive, binder for laminate material and flooring, acid neutralizer and catalyst in polyurethane production Application 2 Used as antioxidant, also used in dye preparation Application 3 Used as curing agent for thermosetting epoxy resin, adhesive, sealant for laminate materials and flooring, acid neutralizer and catalyst in polyurethane production. Numbering system. CAS No.: 90-72-2 MDL No.: MFCD00008330 EINECS No.: 202-013-9 RTECS No.: SN3500000 BRN No.: 795751 PubChem No.: 24900319 Safety information. Package Class: III Hazard Class: 8 Customs Code: 29222900 Dangerous Goods Transport Code: UN 2735 8/PG 3 WGK Germany: 1 Hazardous category code: R22; R36/38 Safety instructions: S26-S28-S2 RTECS number: SN3500000 Dangerous Goods Marking: Xn Safety terminology. S26 - Immediately after inadvertent contact with eyes, flush with plenty of water and seek medical advice. S28 - Immediately after inadvertent contact with skin, flush with plenty of soapy water. S2 - Avoid contact with children. S61 - Avoid release into the environment. Refer to special instructions/safety data sheet. S45 - In case of accident or discomfort, seek immediate medical attention (if possible, show its label). S36/37/39 - Wear appropriate protective clothing, gloves and goggles or mask. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. After the original packaging, please fasten the lid as soon as possible to prevent the mixing of other substances such as moisture to affect the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/39733

N-methyl-Methylcyclohexylamine CAS 100-60-7 Descriptions： Synonyms： Cyclohexylmethylaminecyclohexyl-methyl-aminemethylcyclohexylamine,[corrosivelabel]Cyclohexylamine,N-methyl-1-MethylcyclohexylamineCyclohexanamine,N-methyl-MethylcyclohexylamineN-Cyclohexylmethylamine CAS No.：100-60-7 Molecular Formula：C7H15N ( Isomeride) Molecular Weight：113.204 EINECS：202-869-3 Category：Pharmaceutical Intermediates Physicochemical properties Density：0.868 Melting point：-8℃ Boiling point：149℃ Refractive index：1.4545-1.4565 Flash point：29℃ Vapor pressure：4.62mmHg at 25°C PSA：12.03000 logP：1.92940 Appearance：transparent and colorless liquid Color： colorless liquid Physical Property：transparent and colorless liquid， Miscible with various organic solvents, slightly soluble in water。Melting point：＆＃8722；9-＆＃8722；7＆＃160；＆＃x00b0；C(lit.) Boiling point：149＆＃160；＆＃x00b0；C(lit.) Density：0.868＆＃160；g/mL＆＃160；at 25＆＃160；＆＃x00b0；C(lit.) Refractive index：n20/D 1.456(lit.) Flash point：85＆＃160；＆＃x00b0；F Water solubility：5.4 g/100 mL (20 ＆＃186；C) transparent and colorless liquid. Miscible with various organic solvents, slightly soluble in water。 transparent and colorless liquid。 Boiling point 147~151℃ Relative density 0.868 Refractive index 1.4456 Flash point 29℃ Solubility Miscible with various organic solvents, slightly soluble in water Solubility：Slightly soluble in water, soluble in benzene, alcohol, etc Application： Used as intermediates in medicine and dyes Pharmaceutical and dye intermediates. Used as an intermediate in the drug bromohexamine hydrochloride Production Method： With cyclohexylamine as raw material prepared. 2. By the reaction of cyclohexanone and methylamine. Soak aluminum sheet in methanol, add high mercury chloride, continue to soak 2h, temperature rise does not exceed 55℃, remove the soaking liquid. Add ethanol to the activated aluminum sheet, drop the mixture of methylamine and cyclohexanone under agitation, heat reflux, and place overnight. Adding 10% sodium hydroxide solution alkalization, extracting with benzene twice, after washing by distillation, benzene recovery that distillation of n-methyl cyclohexylamine. The yield is about 80%. ; Storage and transport information：： It should be sealed and stored in a dry and cool ventilated warehouse Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：[email protected] [email protected] More：https://www.ohans.com/n-methyl-methylcyclohexylamine-cas-100-60-7-pdf/